Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

Monolayer Co3O4 Inverse Opals as Multifunctional Sensors for Volatile Organic Compounds

Monolayers of periodic porous Co₃O₄ inverse opal (IO) thin films for gas‐sensor applications were prepared by transferring cobalt‐solution‐dipped polystyrene (PS) monolayers onto sensor substrates and subsequent removal of the PS template by heat treatment. Monolayer Co₃O₄ IO thin films having periodic pores (d≈500 nm) showed a high response of 112.9 to 5 ppm C₂H₅OH at 200 °C with low cross‐responses to other interfering gases. Moreover, the selective detection of xylene and methyl benzenes (xylene+toluene) could be achieved simply by tuning the sensor temperature to 250 and 275 °C, respectively, so that multiple gases can be detected with a single chemiresistor. Unprecedentedly high ethanol response and temperature‐modulated control of selectivity with respect to ethanol, xylene, and methyl benzenes were attributed to the highly chemiresistive IO nanoarchitecture and to the tuned catalytic promotion of different gas‐sensing reactions, respectively. These well‐ordered porous nanostructures could have potential in the field of high‐performance gas sensors based on p‐type oxide semiconductors.     

变角度纤维复合材料层合斜板的颤振分析

假设纤维方向角沿层合板的长度方向线性变化，研究了变角度纤维复合材料层合斜板的颤振．通过坐标变换将斜板变换为正方形板，采用层合板表面连续变化的速度环量来模拟空气对其的作用，速度环量分布利用Cauchy积分公式计算．建立了系统的Lagrange方程并采用Ritz法得到了层合板的自振频率和颤振/不稳定性分离临界速度．通过数值算例验证了本文模型和方法的正确性和收敛性，分析了各个铺层内纤维方向角的变化对自振频率和颤振/不稳定性分离临界速度的影响．研究结果表明，通过纤维的变角度铺设，可有效地提高层合板的基频和颤振/不稳定性分离临界速度．经合理设计的变角度复合材料层合板具有抑制颤振的作用．     

Luminescent Thin Films Enabled by CsPbX3 (X=Cl,Br, I) Precursor Solution

Inorganic cesium lead halide perovskite nanocrystals are candidates for lighting and display materials due to their outstanding optoelectronic properties. However, the dissolution issue of perovskite nanocrystals in polar solvents remains a challenge for practical applications. Herein, we present a newly designed one-step spin-coating strategy to prepare a novel multicolor-tunable CsPbX₃ (X=Cl, Br, I) nanocrystal film, where the CsPbX₃ precursor solution was formed by dissolving PbO, Cs₂CO₃, and CH₃NH₃X into the ionic liquid n-butylammonium butyrate. The as-designed CsPbX₃ nanocrystal films show high color purity with a narrow emission width. Also, the blue CsPb(Cl/Br)₃ film demonstrates an absolute photoluminescence quantum yields (PLQY) of 15.6 %, which is higher than 11.7 % of green CsPbBr₃ and 8.3 % of red CsPb(Br/I)₃ film. This study develops an effective approach to preparing CsPbX₃ nanocrystal thin films, opening a new avenue to design perovskite nanocrystals-based devices for lighting and display applications.     

基于无机纳米材料的抗菌抗病毒功能涂层和薄膜

COVID-19在全球的大流行对人类的健康生活和社会的正常运行都造成了严重的危害. 阻断致病微生物通过受污染表面与人类间接接触传播, 或者避免与其直接接触是保护我们免受伤害的主要方法. 目前的解决措施包括设计开发抗菌抗病毒表面涂层和研发由自清洁薄膜或织物制成的个人防护设备. 综述了近年来几种研究广泛的金属、金属氧化物、金属有机框架材料等用于抗菌抗病毒涂层或薄膜的工作, 对其作用机制和微生物灭活效果进行了总结讨论, 并且评估了其本身的毒性以及实际应用的局限性, 最后就抗菌抗病毒涂层和薄膜开发的挑战和新兴研究方向提出了未来展望.     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

New Opportunities for the Utilization of the Sulfoximine Group in Medicinal Chemistry from the Drug Designer's Perspective**

Extension of the medicinal chemistry toolbox is in the vital interest of drug designers. However, the diffusion of an innovation can be a lengthy process. Along these lines, it took almost 70 years before the use of the sulfoximine group reached a critical mass in medicinal chemistry. Even though interest in this versatile functional group has increased exponentially in recent years, there is ample room for further innovative applications. This Review highlights emerging trends and opportunities for drug designers for the utilization of the sulfoximine group in medicinal chemistry, such as in the construction of complex molecules, proteolysis targeting chimeras (PROTACs), antibody-drug conjugates (ADCs) and novel warheads for covalent inhibition.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线，大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱，使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题，设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构，而石墨烯的二维结构可以牢固地固定卷轴，以确保高导电性复合薄膜与基底之间的粘附性，同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应，实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

Self-Assembly Anisotropic Magnetic Nanowire Films Induced by External Magnetic Field

Self-assembly generated materials induced by an external magnetic field have attracted considerable interest following the development of nanodevices. However, the fabrication of macroscopic and anisotropic magnetic films at the nanoscale remains a challenge. Here, anisotropic magnetic films are successfully prepared using a solution-based nanowire assembly strategy under a magnetic field. The assembly process is manipulated by changing the thickness of silica shell coated on the surface of magnetic nanowires. The anisotropic magnetic films show highly anisotropic magnetization under different angles of magnetic field and better magnetization properties than that of disordered magnetic films. The well-defined nanowire arrays enable magnetization anisotropic property which may be useful in the magnetic energy conversion technologies and biomedical sciences which lie far beyond those achievable with traditional magnetic materials.     

酰胺功能化修饰琼脂糖/硅胶复合材料的制备及吸附性能研究

采用溶胶-凝胶法,以氧化琼脂糖和四甲氧基硅烷为前驱体,通过水解、缩聚反应制得琼脂糖/硅胶复合材料,进一步利用开环、"巯-烯"点击和酰胺化反应对复合材料实现酰胺基团功能化修饰.借助红外光谱(FT-IR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)对所制备复合材料进行结构、组成和微观形貌表征.以制备的酰胺功能化修饰琼脂糖/硅胶复合材料为吸附剂,探讨其对莱克多巴胺的吸附过程,实验考察了溶剂、吸附时间、莱克多巴胺的初始浓度等对吸附的影响.结果表明:经过修饰反应酰胺基团成功接枝到琼脂糖/硅胶复合材料,该材料颗粒呈球形,粒径在2～3μm之间;复合材料对莱克多巴胺表现出良好的吸附性能,吸附过程50 min达到平衡,适合准二级动力学特征,属化学吸附,吸附等温线符合Freundlich模型;复合材料经过6次吸附解析,再生后对莱克多巴胺的吸附率仅有小幅下降,表明具有较好的循环再生吸附能力.